Condor Technology

LP Direct Ex Heater body 6

LP Direct Ex Heater body 6

ELECTRICAL DIRECT HEATER – MODEL LP-(*)A body #6

Description

Application

Direct-heaters for Hazardous locations, designed for direct mounting onto e.g. manifolds etc.

  • Freeze protection
  • Anti-condensation
  • Temperature maintenance

Features and Advantages

  • Self-limiting heating elements
  • Small dimensions
  • No moving parts, no maintenance required, therefore long lifetime
  • Suitable for T4 and T3 classifications
  • Can be used for 110/240 VAC/DC

Remarks

All Cameo Heaters are designed around self-limiting heating elements. These self-limiting semi-conductor elements are saving power consumption. Our Cameo Direct-heaters are designed to heat the installed equipment. If properly selected for freeze protection, no thermostat will be needed.
Please see below for further technical data.

Range

LP-1A T3 ca. 115 °C Surface temperature 100-10 Watt

LP-2A T4 ca. 105 °C Surface temperature 100-10 Watt

LP-3A T4 ca. 90 °C Surface temperature 100-10 Watt

LP-4A T4 ca. 70 °C Surface temperature 100-10 Watt

LP-0AHP (High Power model) T3 ca. 130 °C Surface temperature 200-20 Watt

* these temperatures are measured at 20 °C ambient temperature.

Technical data

Power 100-10 Watt or 200-20 Watt for High Power model

Electrical cable 3 x 1 sqmm, braided std.

Material cable braided silicone, optional: non-braided cable

Standard length ca. 1 mtr. Other lengths optional

Overall dimensions 78 x 40 x 34 mm (LxWxH)

Weight Aluminium heater ca. 400g.

Material black anodized aluminium (A)

Protection class II 2G Ex d IIC T4 or T3

II 2D Ex tD A21 IP66 T 135°C or T200 °C

Certification KEMA 01ATEX2124X and IECEx DEK 11.0017

IP degree IP 66

Voltage 110/240 VAC/DC

Ambient temp. range – 60 °C … + 90 °C

Datasheet

LP Direct Ex Heater

LP Direct Ex Heater

ELECTRICAL DIRECT HEATER – MODEL LP-(*)A, MODEL LP-0AHP or MODEL LP-(*)S

Description

Application

Direct-heaters for Hazardous locations, designed for direct mounting onto e.g. manifolds etc.

  • Freeze protection
  • Anti-condensation
  • Temperature maintenance

Features and Advantages

  • Self-limiting heating elements
  • Small dimensions
  • No moving parts, no maintenance required, therefore long lifetime
  • Suitable for T4 and T3 classifications
  • Can be used for 110/240 VAC/DC

Remarks

All Cameo Heaters are designed around self-limiting heating elements. These self-limiting semi-conductor elements are saving power consumption. Our Cameo Direct-heaters are designed to heat the installed equipment. If properly selected for freeze protection, no thermostat will be needed.

 

Optional body #5 : 4 holes diam. 5,2 mm. available in Aluminium and SS range
For easy mounting, at no extra charge

 

Alternative 316 Stainless Steel heaters can be delivered for the 100-10 Watt range.
Also possible is an aluminium body with four holes drilled through (body #5), for easy mounting.
Please see below for further technical data.

Range

LP-1A T3 ca. 115 °C Surface temperature 100-10 Watt

LP-2A T4 ca. 105 °C Surface temperature 100-10 Watt

LP-3A T4 ca. 90 °C Surface temperature 100-10 Watt

LP-4A T4 ca. 70 °C Surface temperature 100-10 Watt

LP-0AHP (High Power model) T3 ca. 130 °C Surface temperature 200-20 Watt

* these temperatures are measured at 20 °C ambient temperature.

Technical data

Power 100-10 Watt or 200-20 Watt for High Power model

Electrical cable 3 x 1 sqmm, braided std.

Material cable braided silicone, optional: non-braided cable

Standard length ca. 1 mtr. Other lengths optional

Overall dimensions 78 x 30 x 34 mm (LxWxH)

Weight Aluminium heater ca. 350 g., 316 Stainless Steel 360 g.

Material black anodized aluminium (A) or 316 stainless steel (S)

Protection class II 2G Ex d IIC T4 or T3

II 2D Ex tD A21 IP66 T 135°C or T200 °C

Certification KEMA 01ATEX2124X and IECEx DEK 11.0017

IP degree IP 66

Voltage 110/240 VAC/DC

Ambient temp. range – 60 °C … + 90 °C

Optional body #5 4 holes diam. 5,2 mm. available in Aluminium range.

for easy mounting, at no extra charge.

Additional Technical data for the High Power model LP-0AHP, T3, 130 °C:

Overall dimensions 88x36x36 mm (LxWxH)

Material black anodized aluminium only

All other data the same as standard model

Datasheet

CT Direct Ex Heater

CT Direct Ex Heater

ELECTRICAL DIRECT HEATER – MODEL CT-(*)A

Description

Application

Direct-heaters for Hazardous locations, designed for direct mounting onto e.g. manifolds etc.

  • Freeze protection
  • Anti-condensation
  • Temperature maintenance

Features and Advantages

  • Self-limiting heating elements
  • Small dimensions
  • No moving parts, no maintenance required, therefore long lifetime
  • Suitable for T4 and T3 classifications
  • Can be used for 110/240 VAC/DC

Remarks

All Cameo Heaters are designed around self-limiting heating elements. These semi-conductor elements are saving power consumption. Our Cameo Direct-heaters are designed to heat the installed equipment. If properly selected for freeze protection, no thermostat will be needed.

 

When required in other applications, e.g. analyzers, it is normal practice to use our Direct-heaters
in combination with our Fix-Therm96 thermostats (range from 10°C up to 135°C) or our FixTherm Inline Thermostat(range from 10°C up to 60°C).

Range

CT-1A T3 ca. 115 °C Surface temperature* 250-25 Wat

CT-2A T4 ca. 105 °C Surface temperature* 250-25 Wat

CT-3A T4 ca. 90 °C Surface temperature* 250-25 Wat

CT-4A T4 ca. 70 °C Surface temperature* 250-25 Wat

* these temperatures are measured at 20 °C ambient temperature.

Technical data

Power 250-25 Watt

Electrical cable 3 x 1 sqmm

Material cable braided silicone, optional: non-braided cable

Standard length ca. 1 mtr. Other lengths optional

Overall dimensions 88 x 70 x 35 mm (LxWxH)

Weight ca. 550 g.

Material black anodized aluminium

Protection class II 2G Ex d IIC T4 or T3

II 2D Ex tD A21 IP66 T 135°C or T200 °C

Certification KEMA 01ATEX2124X and IECEx DEK 11.0017

IP degree IP 66

Voltage AC/DC 110/240

Ambient temp. range – 60 °C … + 90 °C

Datasheet

CS Direct Ex Heater

CS Direct Ex Heater

ELECTRICAL DIRECT HEATER – MODEL CS-(*)S (Body: 316 Stainless Steel)

Description

Application

Direct-heaters for Hazardous locations, designed for direct mounting onto e.g. manifolds etc.

  • Anticondensation
  • Freeze protection
  • Temperature maintenance

Features and Advantages

  • Self-limiting heating elements
  • Small dimensions
  • No moving parts, no maintenance required, therefore long lifetime
  • Suitable for T4 and T3 classifications
  • Can be used for 110/240 VAC/DC

Remarks

All Cameo Heaters are designed around self-limiting heating elements. These semi-conductor elements are saving power consumption. Our Cameo Direct-heaters are designed to heat the installed equipment. If properly selected for freeze protection, no thermostat will be needed.

When required in other applications, e.g. analyzers, it is normal practice to use our Direct-heaters in combination with our Fix-Therm96 thermostats (range from 10°C up to 135°C) or our FixTherm Inline Thermostat(range from 10°C up to 60°C).

Range

CS-1S T3 ca. 115°C Surface temperature* 250-25 Watt

CS-2S T4 ca. 105°C Surface temperature* 250-25 Watt

CS-3S T4 ca. 90°C Surface temperature* 250-25 Watt

CS-4S T4 ca. 70°C Surface temperature* 250-25 Watt

* these temperatures are measured at 20 °C ambient temperature.

Technical data

Power 250-25 Watt

Electrical cable 3 x 1 sqmm

Material cable braided silicone, optional: non-braided cable

Standard length ca. 1 mtr. Other lengths optional

Overall dimensions 85x65x28 mm (LxWxH)

Weight ca. 900 g.

Material Stainless steel 316

EX protection class II 2G Ex d IIC T4 or T3

II 2D Ex tD A21 IP66 T 135°C or T200 °C

ATEX Certification KEMA 01ATEX2124X and IECEx DEK 11.0017

IP degree IP 66

Voltage AC/DC 110/240

Ambient temp. range – 60°C….+ 90°C

Datasheet