Description
1 Application
Direct-heaters for Hazardous locations, designed for direct mounting onto e.g. manifolds etc.
- Freeze protection
- Anti-condensation
- Temperature maintenance
2 Features and Advantages
- Self-limiting heating elements
- Small dimensions
- No moving parts, no maintenance required, therefore long lifetime
- Suitable for T4 and T3 classifications
- Can be used for 110/240 VAC/DC
3 Remarks
- All Cameo Heaters are designed around self-limiting heating elements. These self-limiting semi-conductor elements are saving power consumption. Our Cameo Direct-heaters are designed to heat the installed equipment. If properly selected for freeze protection, no thermostat will be needed.
- Optional body #5 : 4 holes diam. 5,2 mm. available in Aluminium and SS range
For easy mounting, at no extra charge - Alternative 316 Stainless Steel heaters can be delivered for the 100-10 Watt range.
Also possible is an aluminium body with four holes drilled through (body #5), for easy mounting.
Please see below for further technical data.
4 Range
| LP-1A | T3 | ca. 115 °C Surface temperature | 100-10 Watt |
| LP-2A | T4 | ca. 105 °C Surface temperature | 100-10 Watt |
| LP-3A | T4 | ca. 90 °C Surface temperature | 100-10 Watt |
| LP-4A | T4 | ca. 70 °C Surface temperature | 100-10 Watt |
| LP-0AHP (High Power model) | T3 | ca. 130 °C Surface temperature | 200-20 Watt |
* these temperatures are measured at 20 °C ambient temperature.
5 Technical data
| Power | 100-10 Watt or 200-20 Watt for High Power model |
| Electrical cable | 3 x 1 sqmm, braided std. |
| Material cable | braided silicone, optional: non-braided cable |
| Standard length | ca. 1 mtr. Other lengths optional |
| Overall dimensions | 78 x 30 x 34 mm (LxWxH) |
| Weight | Aluminium heater ca. 350 g., 316 Stainless Steel 360 g. |
| Material | black anodized aluminium (A) or 316 stainless steel (S) |
| Protection class | II 2G Ex d IIC T4 or T3 II 2D Ex tD A21 IP66 T 135°C or T200 °C |
| Certification | KEMA 01ATEX2124X and IECEx DEK 11.0017 |
| IP degree | IP 66 |
| Voltage | 110/240 VAC/DC |
| Ambient temp. range | – 60 °C … + 90 °C |
| Optional body #5 | 4 holes diam. 5,2 mm. available in Aluminium range. |
| for easy mounting, at no extra charge. |
| Additional Technical data for the High Power model LP-0AHP, T3, 130 °C: | |
| Overall dimensions | 88x36x36 mm (LxWxH) |
| Material | black anodized aluminium only |
| All other data | the same as standard model |
